A Logo

Feel free to include my content in your page via my
RSS feed

Help Irongeek.com pay for
bandwidth and research equipment:

Subscribestar or Patreon

Search Irongeek.com:

Affiliates:
Irongeek Button
Social-engineer-training Button

Help Irongeek.com pay for bandwidth and research equipment:

paypalpixle


Man page of OpenVASSD

OpenVASSD

Section: User Manuals (8)
Updated: January 2011
Index of this MAN page

Back To MAN Pages From BackTrack 5 R1 Master List  

NAME

openvassd - The Scanner of the Open Vulnerability Assessment System (OpenVAS)  

SYNOPSIS

openvassd [-v] [-h] [-c config-file] [-S ip[,ip2,...]] [-a address ] [-p port-number] [-D] [-R] [-P] [-q] [-f]

 

DESCRIPTION

OpenVAS is a security auditing framework made up of several modules. The Scanner, openvassd is in charge of executing many security tests against many target hosts in a highly optimized way.

openvassd inspects the remote hosts and attempts to list all the vulnerabilities and common misconfigurations that affects them. Note that openvassd will run in daemon mode by default (unless you specify -f as an option).

 

OPTIONS

-c <config-file>, --config-file=<config-file>
Use the alternate configuration file instead of /usr/local/etc/openvas/openvassd.conf

-a <address>, --listen=<address>
Tell the scanner to only listen to connections on the address <address> which is an IP, not a machine name. For instance, "openvassd -a 192.168.1.1" will make openvassd only listen to requests going to 192.168.1.1 This option is useful if you are running openvassd on a gateway and if you don't want people on the outside to connect to your openvassd.

-S <ip[,ip2,...]>, --src-ip=<ip[,ip2,...]>
Force the source IP of the connections established by OpenVAS to <ip> checks need to fully establish a connection to the remote host. This option is only useful if you have a multi-homed machine with multiple public IP addresses that you would like to use instead of the default one. Example : openvassd -S 192.168.1.1,192.168.1.2,192.168.1.3,192.168.1.4 will make openvassd establish connections with a source IP of one among those listed above. For this setup to work, the host running openvassd should have multiple NICs with these IP addresses set.

-p <port-number>, --port=<port-number>
Tell the scanner to listen on connection on the port <port-number> rather than listening on port 9391 (default).

-f, --foreground
Make the scanner stay in foreground (non-daemon mode)

-q, --quiet
Prevent the scanner from printing the loading status of the plugins at startup

-v, --version
Writes the version number and exits

-h, --help
Show a summary of the commands

 

THE CONFIGURATION FILE

The default openvassd configuration file, /usr/local/etc/openvas/openvassd.conf contains these options:

plugins_folder
Contains the location of the plugins folder. This is usually /usr/local/var/lib/openvas/plugins, but you may change this.
logfile
path to the logfile. You can enter syslog if you want the openvassd messages to be logged via syslogd You may also enter stderr if you want the openvassd logs to be written on stderr. Because openvassd is a sensitive program, you should keep your logs.

max_hosts
is maximum number of hosts to test at the same time which should be given to the client (which can override it). This value must be computed given your bandwidth, the number of hosts you want to test, your amount of memory and the horsepower of your processor(s).

max_checks
is the number of plugins that will run against each host being tested. Note that the total number of process will be max_checks x max_hosts so you need to find a balance between these two options. Note that launching too many plugins at the same time may disable the remote host, either temporarily (ie: inetd closes its ports) or definitely (the remote host crash because it is asked to do too many things at the same time), so be careful.

be_nice
If this option is set to 'yes', then each child forked by openvassd will nice(2) itself to a very low priority. This may speed up your scan as the main openvassd process will be able to continue to spew processes, and this guarantees that openvassd does not deprives other important processes from their resources.

log_whole_attack
If this option is set to 'yes', openvassd will store the name, pid, date and target of each plugin launched. This is helpful for monitoring and debugging purpose, however this option might make openvassd fill your disk rather quickly.

log_plugins_name_at_load
If this option is set to 'yes', openvassd will log the name of each plugin being loaded at startup, or each time it receives the HUP signal.

dumpfile
Some plugins might issue messages, most of the time to inform you that something went wrong. If you want to read these messages, set this value to a given file name. If you want to save space, set this option value to /dev/null

cgi_path
By default, openvassd looks for default CGIs in /cgi-bin and /scripts. You may change these to something else to reflect the policy of your site. The syntax of this option is the same as the shell $PATH variable: path1:path2:...

port_range
This is the default range of ports that the scanner plugins will probe. The syntax of this option is flexible, it can be a single range ("1-1500"), several ports ("21,23,80"), several ranges of ports ("1-1500,32000-33000"). Note that you can specify UDP and TCP ports by prefixing each range by T or U. For instance, the following range will make openvassd scan UDP ports 1 to 1024 and TCP ports 1 to 65535 : "T:1-65535,U:1-1024".

optimize_test
By default, openvassd does not trust the remote host banners. It means that it will check a webserver claiming to be IIS for Apache flaws, and so on. This behavior might generate false positive and will slow the scan down somehow. If you are sure the banners of the remote host have not been tampered with, you can safely enable this option, which will force the plugins to perform their job only against the services they have been designed to check.

checks_read_timeout
Number of seconds that the security checks will wait for when doing a recv(). You should increase this value if you are running openvassd across a slow network slink (testing a host via a dialup connection for instance)

non_simult_ports
Some services (in particular SMB) do not appreciate multiple connections at the same time coming from the same host. This option allows you to prevent openvassd to make two connections on the same given ports at the same time. The syntax of this option is "port1[, port2....]". Note that you can use the KB notation of openvassd to designate a service formally. Ex: "139, Services/www", will prevent openvassd from making two connections at the same time on port 139 and on every port which hosts a web server.

plugins_timeout
This is the maximum lifetime, in seconds of a plugin. It may happen that some plugins are slow because of the way they are written or the way the remote server behaves. This option allows you to make sure your scan is never caught in an endless loop because of a non-finishing plugin.

safe_checks
Most of the time, openvassd attempts to reproduce an exceptional condition to determine if the remote services are vulnerable to certain flaws. This includes the reproduction of buffer overflows or format strings, which may make the remote server crash. If you set this option to 'yes', openvassd will disable the plugins which have the potential to crash the remote services, and will at the same time make several checks rely on the banner of the service tested instead of its behavior towards a certain input. This reduces false positives and makes openvassd nicer towards your network, however this may make you miss important vulnerabilities (as a vulnerability affecting a given service may also affect another one).

auto_enable_dependencies
OpenVAS plugins use the result of each other to execute their job. For instance, a plugin which logs into the remote SMB registry will need the results of the plugin which finds the SMB name of the remote host and the results of the plugin which attempts to log into the remote host. If you want to only select a subset of the plugins available, tracking the dependencies can quickly become tiresome. If you set this option to 'yes', openvassd will automatically enable the plugins that are depended on.

use_mac_addr
Set this option to 'yes' if you are testing your local network and each local host has a dynamic IP address (affected by DHCP or BOOTP), and all the tested hosts will be referred to by their MAC address.

rules
path to the rules database

The other options in this file can usually be redefined by the client.

 

USERS MANAGEMENT

The utility openvas-adduser(8) creates new openvassd users. Each openvassd user is attributed a "home", in /usr/local/var/lib/openvas/users/<username>. This home contains the following directories :

auth/
This directory contains the authentication information for this user. It might contain the file 'dname' if the user is authenticating using a certificate, or 'hash' (or 'passwd') if the user is authenticating using a password. The file 'hash' contains a MD5 hash of the user password, as well as a random seed. The file 'password' should contain the password in clear text.

This directory also contains the file 'rules' which contains the rules which apply to this user.

The content of this directory can not be altered by the user in any way whatsoever

kbs/
This directory contains the knowledge base (KB) of each host tested by this user, if the user has enable the option 'save_kb'.

When a user attempts to log in, openvassd first checks that the directory /usr/local/var/lib/openvas/users/<username> exists, then hashes the password sent by the user with the random salt found in <username>/auth/hash, and compares it with the password hash stored in the same file. If the users authenticates using a certificate, then openvassd checks that the certificate has been signed by a recognized authority, and makes sure that the dname of the certificate shown by the user is the same as the one in <username>/dname.

To remove a given user, use the command openvas-rmuser(8).

 

THE RULE SET FORMAT

A rule has always the same format which is:
       keyword IP/mask

Keyword is one of reject , accept or default

In addition to this, the IP address may be preceded by an exclamation mark (!) which means: ``not'' There are three sources of rules:

the rules database, which applies to every users
the users database rules, which applies to one user
the users rules, defined by the user in the client

You must know that there is a priority in the rules: the user can not extend its privileges, but can only lower them. (that it, it can only restrict the set of hosts he is allowed to test).

 

THE RULES DATABASE

The rules database contains the system-wide rules, which applies for every user. Its syntax has been defined in the previous section. Example:

accept 127.0.0.0/8
reject 192.168.1.1/32
reject !192.168.0.0/16
default reject

This allows the user to test localhost, and all the hosts on 192.168.0.0/16, except 192.168.1.1/32.
The rules accept the special keyword client_ip which is replaced, at connection time, by the IP of the user who logs in. If you want everyone to test his own box only, then you can do:

accept client_ip/32
default reject

 

NETWORK USAGE

Bear in mind that OpenVAS can be quite network intensive. Even if the OpenVAS developers have taken every effort to avoid packet loss (including transparently resending UDP packets, waiting for data to be received in TCP connections, etc.) so bandwidth use should always be closely monitored, with current server hardware, bandwidth is usually the bottleneck in a OpenVAS scan. It might not became too apparent in the final reports, scanners will still run, holes might be detected, but you will risk to run into false negatives (i.e. OpenVAS will not report a security hole that is present in a remote host)

Users might need to tune OpenVAS configuration if running the scanner in low bandwidth conditions (low being 'less bandwidth that the one your hardware system can produce) or otherwise will get erratic results. There are several parameters that can be modified to reduce network load:

checks_read_timeout
(Introduced in OpenVAS 0.99.4) The default value is set to 5 seconds, that can (should) be increased if network bandwidth is low in the openvassd.conf or openvasrc configuration files. Notice that it is recommended to increase this this value, if you are running a test outside your LAN (i.e. to Internet hosts through an Internet connection), to over 10 seconds.

max_hosts
Number of hosts to test at the same time (this value is set by the OpenVAS GUI client or by .openvasrc) it can be as low as you want it to be (obviously 1 is the minimum)

max_checks
Number of checks to test at the same time (this value is also set by the OpenVAS GUI client or by .openvasrc ) it can be as low as you want it to be and it will also reduce network load and improve performance (obviously 1 is the minimum) Notice that the OpenVAS scanner will spawn max_hosts * max_checks processes.

Other options might be using the QoS features offered by your server operating system or your network to improve the bandwidth use.

It is not easy to give a bandwidth estimate for a OpenVAS run, you will probably need to make your own counts. However, assuming you test 65536 TCP ports. This will require at least a single packet per port that is at least 40 bytes large. Add 14 bytes for the ethernet header and you will send 65536 * (40 + 14) = 3670016 bytes. So for just probing all TCP ports we may need a multitude of this as nmap will try to resend the packets twice if no response is received.

A very rough estimate is that a full scan for UDP, TCP and RPC as well as all NASL scripts may result in 8 to 32 MB worth of traffic per scanned host. Reducing the amount of tested part and such will reduce the amount of data to be transfered significantly.

 

SEE ALSO

openvas(1), openvas-adduser(8), openvas-rmuser(8), openvas-mkcert(8)

 

MORE INFORMATION ABOUT THE OpenVAS PROJECT

The canonical places where you will find more information about the OpenVAS project are:

http://www.openvas.org/ (Official site)
http://wald.intevation.org/projects/openvas/ (Developers site)
http://bugs.openvas.org (Bug Tracker)
       
 

AUTHORS

openvassd was forked from nessusd in 2005. Nessusd was written by Renaud Deraison <deraison@cvs.nessus.org>. Since 2005 the OpenVAS development team improved and extended the tool.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
THE CONFIGURATION FILE
USERS MANAGEMENT
THE RULE SET FORMAT
THE RULES DATABASE
NETWORK USAGE
SEE ALSO
MORE INFORMATION ABOUT THE OpenVAS PROJECT
AUTHORS

This document was created by man2html, using the manual pages.
Time: 07:34:21 GMT, September 13, 2011

Printable version of this article

15 most recent posts on Irongeek.com:


If you would like to republish one of the articles from this site on your webpage or print journal please contact IronGeek.

Copyright 2020, IronGeek
Louisville / Kentuckiana Information Security Enthusiast